Fisher Scientific Isotemp Standard Lab Incubator, Medium Model
Features of the Fisher Scientific Isotemp Standard Lab Incubator: Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies, and more. Electrical receptacle inside (5A at 120VAC) to plug in a stirrer, shaker, or other apparatus. Small (2.5 cu. ft.) and medium (3.75 cu. ft.) incubators each come with one plated-steel shelf large (5.0 cu. ft.) incubator comes with two shelves. Easy to operate: &bull Microprocessor control. &bull Controls are conveniently located at the top of the incubator chamber. &bull Keypad with arrow keys to increase or decrease setpoint temperature in 0.1°C increments. &bull Over-temperature value is automatically set at 3°C above set-point. &bull PID controller comes with fixed parameters so no tuning is required. &bull Circuit breaker protects incubator from power surges battery backup. &bull Designed to stack two units. Big three-character LED display: &bull Digits display actual temperature to nearest 0.1°C. &bull Display shows current value for setpoint temperature. &bull HEAT indicator light cycles on and off to show when incubator heaters are on. &bull ALARM indicator lights up if temperature exceeds overtemperature limit backup controller maintains temperature at 3°C above setpoint safety backup built into software. Small, medium, and large workload capacities: &bull Available in three chamber capacities. &bull Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement. &bull Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds 11 shelves. Low-maintenance incubators with inner and outer doors: &bull Cabinet has durable, enamel-coated steel exterior. &bull Extruded aluminum trim has acrylic powder coating. &bull Chamber is easy-to-clean stainless steel. &bull Low-watt-density heater elements are designed for long life. &bull Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss. &bull Outer door opens to 180° for unhindered access and features two grabber-type latches. &bull Inner door is tempered glass. &bull Steel shelves are 173/8 in. wide and 163/4 in. front-to-back (44 x 42.5cm). &bull Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation. &bull Certifications: CSA approved. &bull Warranty: One year. Product Specifications: &bull Capacity (Chamber Volume): 3.75 cu. ft. (106.2L). &bull Temperature Range: 30° to 75°C (86° to 167°F). &bull Average Uniformity: ±0.7°C at 37°C. &bull Resolution: 0.1°C. &bull Control Sensitivity: ±0.1°C. &bull Recovery: 2 min. &bull Air Changes per Hour: 4. &bull BTU per H crackcrackcrackcrack
This product
made by Fisher Scientific is
not currently one of the featured
medical/nursing uniform products on Buy-Scrubs.com. You can find our featured products on the left side.
User Reviews
There are no reviews posted for this item. Be the first to review it!
Post a Review
| Your Name: | Location: | Email: | Show Email? |
|---|---|---|---|
| Review Title: | |||
| Review: | |||